ATEX T2 Base Drum Heater 200L 240V/1100W (300C) ~120C

The ATEX Base Drum Heater for 200L Drums is designed for maximum safety and performance in hazardous environments. Approved for Zone 1 & Zone 2 applications, it features self-regulating heating technology and an integrated digital thermostat for precise temperature control. With an IP66 rating, it is ideal for outdoor use, providing reliable operation in wet and harsh weather conditions. The heater is built with a robust aluminum plate and conductive castors, ensuring ease of handling and transportation.

Requesting a non-binding offer is easy!

Simply fill out the form and we will reply as soon as we can. Normally we will respond within a few hours.

Select country:

Select model:

Here you can specify the variant(s) you are interested in getting a quote for.

Info

Specification

Info


Our ATEX Base Heater for 200L Drums is the perfect solution for maintaining the temperature of various media in hazardous environments. Built to meet stringent ATEX standards, this heater is ideal for use in chemical processing plants, oil refineries, and other industries where safety is paramount. The heater utilizes self-regulating heating cable technology, which automatically adjusts its output to ensure consistent heat distribution and prevent overheating.

An integrated digital thermostat allows for accurate temperature control, giving users peace of mind when handling sensitive materials or maintaining process flows. With an IP66 rating, the heater is suitable for outdoor environments, making it resistant to dust and water ingress, ensuring reliable performance even in challenging conditions. The heater is also fitted with conductive castors for easy mobility and positioning, making it highly versatile across different workspaces.
1235-99930142 ATEX Base Drum Heater (240V/1100W, T2, 120°C)

This model is perfect for high-temperature applications, operating at approximately 120°C while offering a T2 classification. Ideal for heavy oils and other high-temperature processes.
Technical Specifications:
Area Classification Hazardous Area per ATEX Directive 2014/34/EU
Zone 1 & 2 (Gas)
Temperature Class T2 (300°C), T4 (135°C), T5 (100°C)
Ambient Temperature Range -40°C to +50°C
Unit Marking Ex e IIC T* Gb
Norms EN, IEC Standards
Height 75 mm for heating surface
Length 1100 mm including conductive castors
Outer Diameter 546 mm for heating surface
Heater self-regulating heating cable
Different power outputs depending on T-Class
Including termination and end seal kits
Ingress Protection IP66 to IEC 60529
Thermal Insulation 50 mm mineral-fiber blanket
Housing Mild steel, sheet metal, painted
Color Outer surfaces structured blue
Heating Plate Aluminium, anodized black
Temperature Sensor PT100 to IEC 60751, intrinsically safe, integrated
Ingress Protection Unit IP54 to IEC 60529
Temperature Controller Electronic, encapsulated, externally mounted in enclosure
Control Range 0°C to 500°C
Ingress Protection IP66 to IEC 60529
Electrical Protection Class I
Maximum Operating Temperature 180°C (depending on Temperature Class)
Nominal Supply Voltage AC 230 V 1-phase 50Hz
Wiring and Supply Cable tear and notch resistant silicone rubber
Supply Cable Length 3.0 m, flying leads

Specification

Info Specification

Our ATEX Base Heater for 200L Drums is the perfect solution for maintaining the temperature of various media in hazardous environments. Built to meet stringent ATEX standards, this heater is ideal for use in chemical processing plants, oil refineries, and other industries where safety is paramount. The heater utilizes self-regulating heating cable technology, which automatically adjusts its output to ensure consistent heat distribution and prevent overheating.

An integrated digital thermostat allows for accurate temperature control, giving users peace of mind when handling sensitive materials or maintaining process flows. With an IP66 rating, the heater is suitable for outdoor environments, making it resistant to dust and water ingress, ensuring reliable performance even in challenging conditions. The heater is also fitted with conductive castors for easy mobility and positioning, making it highly versatile across different workspaces.

1235-99930142 ATEX Base Drum Heater (240V/1100W, T2, 120°C)
This model is perfect for high-temperature applications, operating at approximately 120°C while offering a T2 classification. Ideal for heavy oils and other high-temperature processes.

Technical Specifications:

Area Classification Hazardous Area per ATEX Directive 2014/34/EU
Zone 1 & 2 (Gas)
Temperature Class T2 (300°C), T4 (135°C), T5 (100°C)
Ambient Temperature Range -40°C to +50°C
Unit Marking Ex e IIC T* Gb
Norms EN, IEC Standards
Height 75 mm for heating surface
Length 1100 mm including conductive castors
Outer Diameter 546 mm for heating surface
Heater self-regulating heating cable
Different power outputs depending on T-Class
Including termination and end seal kits
Ingress Protection IP66 to IEC 60529
Thermal Insulation 50 mm mineral-fiber blanket
Housing Mild steel, sheet metal, painted
Color Outer surfaces structured blue
Heating Plate Aluminium, anodized black
Temperature Sensor PT100 to IEC 60751, intrinsically safe, integrated
Ingress Protection Unit IP54 to IEC 60529
Temperature Controller Electronic, encapsulated, externally mounted in enclosure
Control Range 0°C to 500°C
Ingress Protection IP66 to IEC 60529
Electrical Protection Class I
Maximum Operating Temperature 180°C (depending on Temperature Class)
Nominal Supply Voltage AC 230 V 1-phase 50Hz
Wiring and Supply Cable tear and notch resistant silicone rubber
Supply Cable Length 3.0 m, flying leads