Heating Blanket 0-90°C for Blade Tip

Tuotetunnus (SKU): 07-8778 Osasto: Lämpö huopa

Specifically designed for curing the leading and trailing tip of wind turbine blades.
Operates at a stable temperature of approximately 60º or 80º C, ensuring optimal curing conditions.
Allows for safe and efficient post-curing procedures, eliminating the risk of grinding non-cured material.
Customizable in different sizes and power configurations to meet specific customer requirements.
Compatible with the Kuhlmann Digital Temperature Controller for precise temperature adjustment.

Requesting a non-binding offer is easy!

Simply fill out the form and we will reply as soon as we can. Normally we will respond within a few hours.

Select country:

Select model:

Here you can specify the variant(s) you are interested in getting a quote for.

Info

Specification

Info

The Heating Blanket for Blade Tips from Kuhlmann Electro-Heat A/S is a specialized solution designed to meet the unique needs of wind turbine blade tip curing. This heating blanket is engineered to provide a stable operating temperature of approximately 60º or 80º C, ensuring optimal curing conditions for your blade tips.
Once the blade tips have been cured, ground, and polished, you can carry out any required procedures without the risk of grinding non-cured material. This not only ensures the safety of your operations but also helps protect the environment by preventing the release of hazardous substances.
Our heating blankets are delivered with a mounted controller, ensuring precise temperature adjustment and optimal curing conditions right out of the box. The heating blankets can be customized in different sizes and power configurations to meet your specific requirements.
Whether you're involved in wind turbine rotor blade production or blade repair, the Heating Blanket for Blade Tips offers a reliable, efficient, and environmentally friendly solution for your curing needs.
Technical Specifications

Material: Nylon
Insulation: Polyester, 8mm for minimal heat loss
Heating Wire: Teflon
Grounded Heating system
Safety Thermostat
Available with adjustable Digital temperature controllers, Temp Sensor, or bi-metal limiter
3M power Cable (no plug)
Optimal for curing composite materials, carbon, and epoxy pre preg
Can be put together to cover a larger surface
Straps for fixed installation (optional)
Many sizes in stock, special sizes produced upon request

Specification

SKU	Blade	Dimensions	Effect	Wattage
20-2860	B58	1000x680 mm.	2x230V	2 x 220W
20-2860	B55	1000x680 mm.	2x230V	2 x 220W
10-9570DT	B58	1000x680 mm.	2x110V	2 x 220W
10-9570DT	B55	1000x680 mm.	2x110V	2 x 220W
08-9100DT	B52	900x1090 mm.	2x230V	2 x 265W
10-9571DT	B49	1020x660 mm.	2x230V	2 x 183W
08-9101	B45	1150x810 mm.	2x230V	2 x 265W
08-9151DT	B40	1200x880 mm.	2x230V	2 x 295W
11-9722ADT	B55	830x630 mm.	2x110V	2 x 75W
11-9722DT	B55	830x630 mm.	2x208V	2 x 75W
07-8778CDT	B44	570x490 mm.	2x110V	2 x 55W
19-2620	B44	570x490 mm.	2x230V	2 x 55W

Info Specification

The Heating Blanket for Blade Tips from Kuhlmann Electro-Heat A/S is a specialized solution designed to meet the unique needs of wind turbine blade tip curing. This heating blanket is engineered to provide a stable operating temperature of approximately 60º or 80º C, ensuring optimal curing conditions for your blade tips.

Once the blade tips have been cured, ground, and polished, you can carry out any required procedures without the risk of grinding non-cured material. This not only ensures the safety of your operations but also helps protect the environment by preventing the release of hazardous substances.

Our heating blankets are delivered with a mounted controller, ensuring precise temperature adjustment and optimal curing conditions right out of the box. The heating blankets can be customized in different sizes and power configurations to meet your specific requirements.

Whether you're involved in wind turbine rotor blade production or blade repair, the Heating Blanket for Blade Tips offers a reliable, efficient, and environmentally friendly solution for your curing needs.

Technical Specifications

Material: Nylon
Insulation: Polyester, 8mm for minimal heat loss
Heating Wire: Teflon
Grounded Heating system
Safety Thermostat
Available with adjustable Digital temperature controllers, Temp Sensor, or bi-metal limiter
3M power Cable (no plug)
Optimal for curing composite materials, carbon, and epoxy pre preg
Can be put together to cover a larger surface
Straps for fixed installation (optional)
Many sizes in stock, special sizes produced upon request

SKU	Blade	Dimensions	Effect	Wattage
20-2860	B58	1000x680 mm.	2x230V	2 x 220W
20-2860	B55	1000x680 mm.	2x230V	2 x 220W
10-9570DT	B58	1000x680 mm.	2x110V	2 x 220W
10-9570DT	B55	1000x680 mm.	2x110V	2 x 220W
08-9100DT	B52	900x1090 mm.	2x230V	2 x 265W
10-9571DT	B49	1020x660 mm.	2x230V	2 x 183W
08-9101	B45	1150x810 mm.	2x230V	2 x 265W
08-9151DT	B40	1200x880 mm.	2x230V	2 x 295W
11-9722ADT	B55	830x630 mm.	2x110V	2 x 75W
11-9722DT	B55	830x630 mm.	2x208V	2 x 75W
07-8778CDT	B44	570x490 mm.	2x110V	2 x 55W
19-2620	B44	570x490 mm.	2x230V	2 x 55W